Short Courses (scheduled on December 15, 2003, detailed schedule TBD)
SC1. MEMS for Optical Networking
L. Lin, University of Washington, USA
Description: Since its advent in 1980's, MEMS technology has made significant progresses and contributions in broad areas ranging from automobile and aviation industries to bio-medical engineering, with applications in optical communications most actively pursued in recent years. Chiefly fueled by the swift maturation of wavelength-division-multiplexing (WDM) technologies and the rapid growth in demand for optical network capacity, innovative component and sub-system technologies have become critical in improving WDM transmission performance and providing crucial optical networking management capabilities. This course focuses on the applications of MEMS in various optical-fiber communication components and sub-systems. The aim is to provide a broad understanding of MEMS technology, and detailed principles of optical-network elements implemented by MEMS.
SC2. Optical Amplifiers for Wavelength-Multiplexing Systems
E. Goldstein, University of Washington, USA
Description: The emergence and swift maturation of practical optical gain has launched a fundamental rebuilding of lightwave-communications networks, with fiber amplifiers dramatically boosting point-to-point capacities via WDM, and standard cross-office interfaces raising the prospect of optical-layer networking on a continental scale. In single-wavelength systems, the gain-compressed fiber amplifier, once rediscovered, almost immediately resolved the fundamental problem of fiber loss by delivering self-regulated signal-power levels while accumulating spontaneous-emission noise close to the quantum-mechanical minimum. However, when lightwave networks employ WDM signals, some of the more substantial challenges are those posed by the amplifier chains themselves. In this course, we closely examine these challenges and their physical underpinnings and describe the emerging arsenal of techniques for ameliorating them.
SC3. Optical Components for DWDM Optical Networks
P. Yeh, Department Electrical and Computer Engineering, University of California Santa Barbara, USA
Description: This course should enable you to: (a) Have a good understanding of the network needs; (b) Have a good understanding of the enabling properties of optical components; (c) Have a good understanding of the problems in optical networks, and the optical solutions; (d) Have a good understanding of the problem of wavelength management and dispersion management; (e) Design optical components to solve network problems
SC4. Fundamentals of Organic Light-Emitting Devices 
G. Jabbour, Optical Sciences Center, University of Arizona, USA 
Description: The course will provide an introduction to organic light-emitting devices (small molecules and polymer) including operational mechanism, fabrication already working in the area will benefit from the contents of this course. 
SC5. High Speed Electronic and Optoelectronic Components for Optic Fiber Communications
Y. K. Chen, High Speed Electronics Research, Bell Laboratories, Lucent Technologies, USA
Description: To provide an overview of the critical electronic and optoelectronic components used in today's long haul and metro optic fiber network.
SC6. DWDM Photonics Systems for Broadband Telecom Networks
C. L. Lin, The Chinese University of Hong Kong, Hong Kong, China
Description: This course provides an introductory-level overview on the dense-wavelength-division multiplexing (DWDM) technologies and systems applications. The students will learn about the role of various DWDM technologies in high-capacity fiber communications systems, their applications from ultra-long-haul systems to local access networks, and recent trends.
SC7. Packaging of Optoelectronic Components and Modules
W. H. Cheng, National Sun Yat-Sen University, Taiwan
Description: This short course provides an overview of the issues, current solutions, and future trends in optoelectronic component and module packaging. The course will cover the aspects of materials, optics, and joint methods required to understand the packaging technology for low-cost and high-performance optoelectronic components and modules. The current packaging technology in passive alignment, laser welding, and plastic techniques for laser modules will be discussed.
SC8. Broadband Access Neworking Technologies for Next Generation Internet
G. K. Chang, Georgia Institute of Technology, USA
Description: The goal is to understand key technologies and applications for next generation Internet (NGI). Paradigm shift of killer applications from the user and network service providers perspectives will be emphasized. Emerging network technologies and standards on the horizon, such as EPON for access, 10 GbE network for LAN and Metro, iFCP and FCIP for SAN, InfiniBand and iSCSI for backplane communications, and OC-768 for SONET/SDH will be reviewed. Key optical and electronic technologies that can meet network interface and performance requirements of NGI will be investigated. Networking technologies that enable burst mode data transport and switching using optical headers and dynamic distributed control plane will be presented. New services and functions in the area of network protection and restoration, biomedical imaging and data transport, massive data transfer and storage, and surveillance video for homeland security will be discussed.
SC9. Vertical Cavity Surface Emitting Lasers
C. J. Chang-Hasnain, University of California, Berkeley, USA
Description: In this short course, I will review basic device physics, design principles, recent advances and system performance of vertical cavity surface emitting lasers (VCSELs). Recent progress and various designs on long wavelength VCSELs will be reviewed, including those employ new active materials such as GaInNAs(Sb) and GaAsSb quantum wells, and In As quantum dots, and those with novel Bragg reflector designs such as metamorphic GaAlAs on InP and GaAlAsSb on InP . System level transmission performance and their direct relationship with VCSEL designs will be discussed. I will also discuss VCSEL applications in local area networks (LAN), storage area networks (SAN) and metropolitan area networks (MAN).